L1-07A.02 – Digital Communicators

L1-07A.02 – Digital Communicators Digital Communicators are used to transmit a signal from the alarm site over regular landline telephone wires (POTS = plain old telephone service) to an alarm monitoring station The communicator seizes the customer’s phone...

L1-06E.04 – Connect the RJ31 X

L1-06E.04 – Connect the RJ31 X Check the instructions for the proper order of connecting devices Note: you may use an RJ31x cord with a landline, cell phone or other communications...

L1-06E.03 Connect the Power

L1-06E.03 Connect the Power Check the instructions for the proper order of connecting devices Some panels will only startup correctly if the transformer is powered up first Others need the battery connected...

L1-06E.02 Connect the Sensors

L1-06E.02 Connect the Sensors Make sure you wire the sensor to match how you program the zone If you programmed the zone to alarm when the circuit closes make sure you wire the sensor so that it normally keeps the circuit open but closes on alarm Wire the resistor...