L1-10C.12 – Grounding Properly Ground wire from control to ground must be at least 14 AWG wire If run outdoors, ground wire must be 6 AWG wire OR be protected If protection is conductive, ground protection must also be...
L1-10C.11 – Unify Grounds When you ground multiple components, it is critical that all components are connected to the same grounding system. Using different grounding systems will create secondary current paths or ground loops that can degrade performance and...
L1-10C.10 – Grounding is Required Electrodes permitted for grounding Metal underground water pipe Metal frame of building or structure Rod & pipe electrodes –Iron or steel- 8ft length 5/8 in diameter Need 6 ft of Space from any other electrode Install...
L1-10C.08 – Electrical Connections Splices –All splices and joints and the free ends of conductors shall be covered with an insulation equivalent to that of the conductors or with an insulating device identified for the...
L1-10C.07 – Electrical Connections Splices –Conductors shall be spliced or joined with splicing devices identified for the use or by brazing, welding, or soldering with a fusible metal or...
Recent Comments